Tips for a successful search

Using specific industry keywords and phrases will generate the best results for your search. Generic terms like asphalt, building materials, chemicals, etc. will generate a large number of results.
If you are searching to see if we perform a specific Test Method or Specification, use the  Product Testing Index
Call us anytime 813-621-5777
Validated Products
  • Listee
    • Owens Corning
  • Manufacturer Location
    • Medina, OH
    • Portland, OR
  • Category
    • Roofing Material
  • SubCategory
    • Asphalt Shingle
  • Certification(s)
    • ANSI FM 4473 Class 3
    • ASTM D3462
    • ASTM D3161 Class F
    • ASTM E108 Class A
    • CSA A123.5
    • ICC-ES AC438
    • UL 2218 Class 3

ProEdge (Canada)

ProEdge (Canada) is a self-sealing prefabricated hip and ridge shingle. Shingles are manufactured with fiberglass mat coated with asphalt on both sides, and surfaced on the weather-exposed side with mineral granules. Shingles have approximate dimensions of 12in x 12in or 13-1/4in x 9-27/32in.

Ratings

ANSI FM 4473 (Impact)
Product has met Class 3 requirements of ANSI FM 4473 when installed over minimum 15/32in thick APA-rated plywood decks.

ASTM D3462
Product has met Table 1 (Physical Requirements) and Table 2 (Masses) requirements of ASTM D3462.

ASTM D3161 (Wind)
Product has met Class F - 110mph (177km/h) requirements of ASTM D3161 (as evaluated in general accordance with UL 2375).

ASTM E108 (Fire)
Product has met Class A requirements of ASTM E108 (as evaluated in general accordance with UL 2375) when installed over minimum 3/8in thick APA-rated plywood decks with minimum single-layer of ASTM D226 Type I, ASTM D4869 Type I, or ASTM D6757 underlayment or other underlayment that is listed for use with Class A asphalt shingle. Slope is unlimited.

CSA A123.5
Product has met specification requirements of CSA A123.5.

ICC-ES AC438
Product has met Table 1 (Physical Requirements) and Table 2 (Additional Requirements) of ICC-ES AC438.

UL 2218
Product has met Class 3 requirements of UL 2218 when installed over minimum 15/32in thick APA-rated plywood decks.