Tips for a successful search

Using specific industry keywords and phrases will generate the best results for your search. Generic terms like asphalt, building materials, chemicals, etc. will generate a large number of results.
If you are searching to see if we perform a specific Test Method or Specification, use the  Product Testing Index
Call us anytime 813-621-5777
Validated Products
  • Listee
    • Atlas Roofing Corporation
  • Manufacturer Location
    • Hampton, GA
    • Ardmore, OK
  • Category
    • Roofing Material
  • SubCategory
    • Asphalt Shingle
  • Certification(s)
    • ASTM D3462
    • ASTM D3161 Class F
    • ASTM E108 Class A

Pro-Cut HP42 Starter

Pro-Cut HP42 Starter is a self-sealing prefabricated starter shingle. Shingles are manufactured with fiberglass mat coated with asphalt on both sides, and surfaced on the weather-exposed side with mineral granules. Each shingle has approximate dimensions of 42in x 16in, which yields two 42in x 8in starter pieces.

Ratings

ASTM D3462
Product has met specification requirements of ASTM D3462.

ASTM D3161 (Wind)
Product has met Class F - 110mph (177km/h) requirements of ASTM D3161 (test configuration modified to evaluate eave detail).

ASTM E108 (Fire)
Product has met Class A requirements of ASTM E108 (test configuration modified to evaluate eave detail) when installed over minimum 3/8in thick APA-rated plywood decks with minimum single-layer of ASTM D226 Type I, ASTM D4869 Type I, or ASTM D6757 underlayment or other underlayment that is listed for use with Class A asphalt shingle. Slope is unlimited.