Tips for a successful search

Using specific industry keywords and phrases will generate the best results for your search. Generic terms like asphalt, building materials, chemicals, etc. will generate a large number of results.
If you are searching to see if we perform a specific Test Method or Specification, use the  Product Testing Index. 
Call us anytime 813-621-5777
Validated Products
Attributes
  • Listee
    • Atlas Roofing Corporation
  • Manufacturer Location
    • Dallas, TX
  • Category
    • Roofing Material
  • SubCategory
    • Ventilation
  • Certification(s)
    • FBC (HVHZ) TAS 100(A)
    • ASTM E330
Documents

HighPoint AL50 Slant Back Vent

HighPoint AL50 Slant Back Vent is a low profile, off ridge, aluminum, static vent for use on steep sloped roofs with minimum 3/8 inch thick OSB or minimum 15/32 inch thick plywood. Vents have approximate dimensions of 15-3/4 inches x 20-5/16 inches by 5 inches tall.

Ratings

FBC (HVHZ) TAS 100(A) (Wind and Wind-Driven Rain)
Product has "passed" the requirements for wind and wind-driven rain resistance as set forth in FBC (HVHZ) TAS 100(A).

ASTM E330 (Wind)
Product has a Design Pressure of -86.6psf (ASD margin of safety = 1.5:1) when installed with eight (8) 0.115in x 1-1/4in smooth shank roofing nails (ASTM F1667 NL RF S Q - 58 Z) placed 1 inch in from each side at the corners of the flange and mid span of each of the four sides. Fasteners shall penetrate through sheathing.